Compressor

Applicability
This description applies to the Stereo, Surround, and Immersive versions of the Compressor module.
Overview
Compressor is a module for reducing the dynamic range of a signal. It is used to control level variations and increase consistency before later loudness control or output processing stages.
Processing Principle
The module adjusts signal level according to the selected reference level, ratio, range, and processing profile. Grouping controls whether channels are processed together or independently. The upward compression principle follows the characteristics of the legendary "Jünger Compressors" from the late 1980s and 1990s.
Parameters
 
 
 
Parameter
Description
Linking
Controls how channels are linked in the sidechain for compression.
Enable
Enables or disables the compressor stage.
Reference Level
Sets the reference level used by the compressor. The reference level is the point where the compression response curve crosses with the linear response.
Range
Limits the maximum compression range. The range parameter works symmetrical (above and below reference level).
Ratio
Sets the amount of compression by the steepness of the response curve.
Processing Profile
Selects the compressor processing profile which represent the attack and release timings of the processor.
Clear Processing History
Clears the internal processing history when applied or when a preset is loaded.
Related Processors
FM Conditioner Channel Strip - Stereo
Program Processing Channel Strip - Stereo
Program Processing Channel Strip - Surround
Program Processing Channel Strip - Immersive